top of page
Search
uesuae
Jul 28, 20222 min read
Fiber Reinforced Polymer / Plastic (FRP)
FRP is a composite material that use natural or synthetic fibers to mechanically enhance the strength and stiffness of a polymer matrix...
111 views0 comments
uesuae
Jul 21, 20222 min read
Industrial chimneys
An architectural ventilation structure typically vertical, or as near as possible to vertical, made of masonry, clay or metal that...
323 views0 comments
uesuae
Jul 14, 20223 min read
Cooling Tower for Chilled Water System
Chilled Water System Chilled Water System technology is adopted in large scale HVAC solutions for transferring heat from higher load...
171 views0 comments
uesuae
Jul 6, 20222 min read
CONTROL VALVE
Definition Control Valves are also known as the final control element in automatic control terminology which is due to the process...
204 views0 comments
uesuae
Apr 22, 20223 min read
STORAGE TANK - VENT REQUIREMENT
Proper venting of tanks and vessels is essential to conserve product, reduce emissions and minimize hazards to people and equipment. In...
1,472 views0 comments
uesuae
Apr 15, 20223 min read
ASME CERTIFICATIONS OF PRESSURE VESSEL (U, U2& R STAMP)
Any vessel carrying pressure in excess of 15 PSI falls under the ASME Code and should be stamped or certified by the ASME. ASME’s...
7,846 views0 comments
uesuae
Apr 7, 20223 min read
SELECTION OF DIFFUSER FOR THE THERMAL ENERGY STORAGE (TES) TANK
Thermal Energy Storage(TES) systems are accumulators that store available thermal energy to be used in a later stage when consumption is...
620 views0 comments
uesuae
Apr 1, 20223 min read
PECULIARITIES OF DNV 2.7-1 &2.7-3 CODES
Den Norske Veritas (DNV) is a Norwegian classification society established in 1864 to provide rules for assessing the risks of insuring...
761 views0 comments
uesuae
Mar 28, 20223 min read
Primary Welding Techniques Applicable To Pressure Vessels Fabrication
INTRODUCTION The welds used in the fabrication of pressure vessel undergo a rigorous quality control and assurance process, including...
331 views0 comments
uesuae
Mar 17, 202210 min read
AN OVERVIEW OF API 650 STORAGE TANKS
INTRODUCTION The API 650 is the American standard for welded flat-bottomed vertical storage tanks. This standard dictates tank design,...
5,195 views0 comments
uesuae
Dec 14, 20213 min read
BOILERS AND PRESSURE VESSELS LEARNING MATRIX
BOILERS AND PRESSURE VESSELS FUNDAMENTAL BPV Code, Section I: Power Boilers (LC) – PD665 BPV Code, Section VIII, Division 1: Design &...
139 views0 comments
uesuae
Dec 8, 20212 min read
ASME STANDARDS TECHNOLOGY, LLC
ASME Standards Technology, LLC (ASME ST, LLC) is a not-for-profit company established in 2004. ASME ST, LLC bridges the gap between new...
59 views0 comments
uesuae
Dec 7, 20212 min read
VOLUNTEERING FOR BPVC COMMITTEES
BENEFITS For more than 100 years, ASME has successfully attracted volunteer technical experts to develop, maintain and disseminate ASME...
21 views0 comments
uesuae
Nov 29, 20212 min read
NQA-1 CERTIFICATION
Entering the nuclear supply chain can be a daunting and costly task. To support the nuclear industry, ASME developed its new NQA-1...
81 views0 comments
uesuae
Nov 24, 20213 min read
CONFORMITY ASSESSMENT
ASME’s product certification programs qualify a manufacturer’s or assembler’s quality control system in accordance with ASME Codes and...
19 views0 comments
uesuae
Nov 23, 20212 min read
SERVICE SECTIONS/CODE CASES
SECTION II – MATERIALS Part A covers Ferrous Material; Part B covers Nonferrous Material; Part C covers Welding Rods, Electrodes, and ...
9 views0 comments
uesuae
Nov 22, 20212 min read
NUCLEAR INSERVICE
SECTION XI RULES FOR INSERVICE INSPECTION OF NUCLEAR POWER PLANT COMPONENTS Provides rules for the examination, inservice testing and...
72 views0 comments
uesuae
Nov 21, 20212 min read
CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS
SECTION III RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS Provides general requirements which address the material, design,...
61 views0 comments
uesuae
Nov 18, 20212 min read
FIBER-REINFORCED PLASTIC STANDARDS FOR PRESSURE VESSELS
In 1974 ASME published Section X of the Boiler and Pressure Vessel Code to ensure safe Fiber Reinforced Plastic pressure vessels. This...
118 views0 comments
uesuae
Nov 17, 20212 min read
TRANSPORT TANKS
SECTION XII TRANSPORT TANKS Provides requirements for construction and continued service of pressure vessels for the transportation of...
12 views0 comments
bottom of page